SHOP Home and Gardenware

SHOP BY CATEGORY:
Electrical
Consumer Units & Rcbos
LED Lights & Bulbs
Trade Supplies
Fire & Smoke Alarms
Hand Dryers
Water Heaters
Cables Copper Wire
Homeware
Kitchenware
Outdoor & Garden
Outdoor Furniture
Outdoor Heating
BBQ & Grills
Outdoor Lighting
Garden Leisure
Outdoor Care
Gardening Tools
Garden Decor
Pest Control
Small Appliances
DIY
Building Materials
Tools
Sealants & Adhesives
Paints & Brushes
DIY Accessories
Technology
Health, Beauty & Fashion
Christmas
Sports & Leisure
Car Care
Camping
Lifestyle
Toys & Games
Educational
Outdoor Fun
Animal & Pet Care
Cleaning & Household

Hanson Postfix Fence Post Fix Pre Mixed Fast Set Concrete 20KG

5012016120721
£11.99
Out of stock
1
Product Details
UPC: 2516120000
Brand: Hanson

Hanson Postfix is formulated to produce good quality concrete for setting all types of posts

USES
Hanson Postfix is a good quality post hole concrete for all types of post fixing applications including treated wood/metal posts or supports, concrete and plastic posts
• Easy to use – just add water
• Saves time – quick and convenient
• Economic – less waste than some other methods
QUALITY
Hanson Postfix is factory produced to ensure the highest quality post hole concrete
USAGE RATE
One bag is sufficient to support a post in a hole measuring 250mm x 250mm x 350mm
INSTRUCTIONS FOR USE
1. Dig hole approx. 250mm x 250mm x 350mm deep (one spade width by one spade depth). For large posts over 7 foot (2100mm) in soft ground a deeper hole may be required

2. Position post vertically in hole, and pour in approx 2 litres of water (depends on ground conditions), in porous ground conditions where the water is immediately soaked up, add approximately 10% of the bag with enough water to wet the powder, mix with a stick to form a paste and coat the sides of the hole, allow to set then add the water as before and follow the instructions. (Alternatively the hole can be lined with a plastic bag or similar to stop the water draining away)

3. Empty the contents of the bag into the hole around the post & check the vertical position of the post using a spirit level. Adjust the position of the post and tamp to mix the dry powder and the water/remove air bubbles

4. Sprinkle further water to combine with any dry powder left on the surface.
5. Allow 5-10 minutes for initial set to take place – following this, the post will remain in a vertical position unsupported. Postfix will achieve appreciable strength after 2-4 hours depending on ambient conditions but is best left overnight before attaching fence panels etc.
ADDITION OF OTHER MATERIALS
Hanson Postfix is a pre-packed post hole concrete. The addition of admixtures is not recommended and could adversely affect the performance of the finished product.
STORAGE CONDITIONS AND SOLUBLE CHROMIUM (VI)
• This product must be stored in unopened bags clear of the ground in cool dry conditions and protected from excessive draught.
• If stored correctly, as detailed above, the chromium (vi) in this product will be within required levels for up to 12 months from the date shown on the bag.
• Use of this product after the declared storage period, as detailed above, may increase the risk of an allergic reaction.
Save this product for later
Share by: